|
TWIN TANK WATER SOFTENERS
Twin tank water softeners have two resin
tanks and a separate salt/brine tank. Twin
tank units are always metered (demand), using
either an electro-mechanical metering system,
or computer based microprocessor meter. Twin
tank systems always have a fully regenerated
tank available on standby, and deliver uninterrupted
24 hour supply of softened water. During
regeneration, water is first passed thru
the online tank before entering the tank
undergoing regeneration - regeneration using
this pre-treated water helps clean the system
and extends the water softener lifetime.
Electro-mechanical metered water softeners measure water consumption
with a turbine that turns as your water is used. The turbine is connected
directly to a mechanical water meter by cable. When the user-set gallon
capacity is reached, an electrical motor is activated by a micro-switch,
and moves the water softener through the regeneration process.
Microprocessor based water softeners measure your water consumption,
and regenerate only as required. Sometimes referred to as demand water
softeners, these softeners measure water consumption using a turbine
that turns as your water is used. An electronic sensor detects the rate
of turbine spin and sends a signal to the on-board computer control.
Using parameters that are pre-set by the user (capacity, water hardness,
etc.), the computer determines when regeneration is required and initiates
the regeneration process automatically. Twin tank systems can
be purchased online by visiting our "Twin
Tank Water Softeners" page.
ECT9000 Water Softener - Fleck 9000 (Twin
electro-mechanical 3/4 inch)
ECT9100 Water Softener - Fleck 9100 (Twin electro-mechanical 3/4 inch)
ECT9000-HC Water Softener - Fleck 9000 (Twin electro-mechanical 1 inch)
ECT9100-HC Water Softener - Fleck 9100 (Twin electro-mechanical 1
inch)
SET9000 Water Softener - Fleck 9000 (Twin microprocessor 3/4 inch)
SET9100 Water Softener - Fleck 9100 (Twin microprocessor 3/4 inch)
SET9000-HC Water Softener - Fleck 9000 (Twin microprocessor 1 inch)
SET9100-HC Water Softener - Fleck 9100 (Twin microprocessor 1 inch)
BENEFITS YOU
CAN EXPECT FROM SOFT WATER
- Better Tasting Food & Beverages
- Save Money on Detergents, Soaps & Conditioners
- Extend the Life of Pipes and Fixtures
- Skin & Hair Will Feel Softer & Cleaner
- Cleaner Clothes
|
|
A water softener will improve your quality
of life and save you money as well. Mineral
build-up caused by un-softened water will
no longer occur on pipes, fixtures and equipment.
In many cases, past damage caused by hard
water will actually be reversed!
A Commercial/industrial water softener is
available for any application. Please inquire
for more information!
Twin resin tank/control valve dimensions:
- 24,000 grain capacity, 8" diameter tanks x 44" height (53" height including valve)
- 32,000 grain capacity, 8" diameter tanks x 44" height (55" height including valve)
- 48,000 grain capacity, 10" diameter tanks x 54" height (63" height including valve)
- 64,000 grain capacity, 12" diameter tanks x 52" height (61" height including valve)
Brine (salt) tank
- 18" diameter x 33" height
- Brine valve with backup safety float
- Included brine tank salt platform (salt grid)
- Overflow drain elbow included
WHY CHOOSE A CAI TWIN TANK
WATER SOFTENER?
|
|
CAI Twin Tank Water Softeners
utilize "State of the Art" control
systems to yield higher efficiencies
than other systems. CAI Twin Tank Softeners
provide continuous soft water - even
during regeneration - with unequaled
features! CAI Twin Softeners regenerate
with soft water and use a "fresh
rinse" pre-transfer cycle that completely
exchanges the water in the stand-by tank
before it comes on line. |
| |
|
|
CAI Twin Softening systems are designed
to be easy to use. The high efficiency
metered "on demand" design
uses less salt than standard timed systems.
Our twin tank softeners regenerate and
fill the brine tank with softened water
- keeping your water softener clean for
optimum operating efficiency. |
| |
|
|
CAI Water Softener construction is
second to none. Our valves are constructed
of Noryl, a high-tech patented material
from GE, or durable lead-free brass.
The resin tank is fabricated of fiberglass
and lined with polyethylene - a completely
corrosion resistant system! |
| |
|
|
|
A CAI Water Softener will allow you
to use less soap and detergent, saving
the environment and saving you money.
In addition, a CAI Water Softener prevents
the build-up of harmful mineral scale,
adding years of service life to pipes,
appliances and hot water heaters, thus
paying for itself in the short and long
term. |
| |
|
MORE AVAILABLE FEATURES
A CAI water softener has many available features; including:
- Shipping from our warehouse to your door - The listed price is the full price.
- No added packing & handling charges
- System by-pass valve (3/4 inch twin-tank softeners only - no by-pass available for 1" twin-tank softeners)
- Full charge of high capacity or premium grade Ionac C-249 or C-266 (fine mesh) softener resin for each tank size - We never under-fill our resin tanks!
- Round brine tank - No cheap square "garbage can" tanks supplied!
- Brine tank salt grid and back-up safety check valve for trouble-free operation.
- High Flow 1.05" distributor system with gravel underbed in all twin tank water softeners.
- Funnel provided with each system to allow easy filling of the resin tank during installation.
- All new systems with full manufacturers warranties - No rebuilt or used systems - 5 years warranty on valve & control, 5 year warranty on brine tank - 10 year warranty on resin tanks. Lifetime 24 hour technical support included with each purchase!
COMPARISON OF FEATURES
| Model
No. |
Control
Type |
Control/Valve
Manufacturer |
Control/Valve
Number |
Flow
Capacity |
Valve Size |
Flow
Type |
By-pass
Valve |
| ECT9100 |
C |
Fleck |
9100 EC |
Std. |
3/4" |
Down |
S.S. |
| SET9100 |
M |
Fleck |
9100 SE |
Std. |
3/4" |
Down |
S.S. |
| ECT9100-HC |
C |
Fleck |
9100 EC |
Std. |
3/4" |
Down |
S.S. |
| SET9100-HC |
M |
Fleck |
9100 SE |
Std. |
3/4" |
Down |
S.S. |
| ECT9000 |
C |
Fleck |
9000 EC |
High |
1" |
Down |
N/A |
| SET9000 |
M |
Fleck |
9000 SE |
High |
1" |
Down |
N/A |
| ECT9000-HC |
C |
Fleck |
9000 EC |
High |
1" |
Down |
N/A |
| SET9000-HC |
M |
Fleck |
9000 SE |
High |
1" |
Down |
N/A |
C = Mechanical Meter M = Microprocessor |
OTHER AVAILABLE CAI WATER
SOFTENER SYSTEMS:
MICROPROCESSOR BASED METERED WATER
SOFTENERS
These are single resin tank water softeners, with a separate brine/salt
tank. Microprocessor based units measure your water consumption,
and regenerate only as required. Sometimes referred to as a demand water
softener, these softeners measure water consumption using a turbine
that turns as your water is used. An electronic sensor detects the rate
of turbine spin and sends a signal to the on-board computer control.
Using parameters that are pre-set by the user (capacity, water hardness,
etc.), the computer determines when regeneration is required and initiates
the regeneration process automatically. These water softener systems
can be purchased online by visiting our "Metered
Water Softeners" page.
WS1SM Water Softener - Autotrol 255/460i
(3/4 inch)
WS1LM Water Softener - Autotrol 255/762 (3/4 inch)
WS2SM Water Softener - Autotrol 269/463i (1 inch)
WS3SM-HC Water Softener - Autotrol 268/460i (1 inch)
WS3S-HC Water Softener - Autotrol 268/762 (3/4 inch)
WS4M Water Softener - Fleck 5600SE (3/4 inch)
WS5M-HC Water Softener - Fleck 7000SE (1.25 inch)
WS5MD Water Softener - Fleck 6700 (3/4 inch)
WS6M Water Softener - Fleck 2510SE (1 inch)
WS7SM-HC Water Softener - Clack WS1 (1 inch)
WS8SM-HC Water Softener - Clack WS1 (1.25 inch)
ELECTRO-MECHANICAL METERED WATER SOFTENERS
These are single resin tank water softeners,
with a separate brine/salt tank. Theses
units measure your water consumption
and regenerate only as required. Also referred to as demand water softeners,
electro-mechanical metered water softeners measure water consumption
with a turbine that turns as your water is used. The turbine is connected
directly to a mechanical water meter by cable. When the user-set gallon
capacity is reached, an electrical motor is activated by a micro-switch,
and moves the water softener through the regeneration process. These
water softener systems can also be purchased online by visiting our "Metered
Water Softeners" page.
WS4C Water Softener - Fleck 5600EC (3/4
inch)
WS6C Water Softener - Fleck 2510EC (1 inch)
TIME CLOCK BASED WATER SOFTENERS
Time clock water softeners are different from metered water softeners,
as they regenerate on a calendar basis. They do not measure water consumption,
and only regenerate on the day-of-the-week as set by the user. An electrical
motor automatically initiates the regeneration process as the time
setting is reached. These water softener systems can be purchased online
by visiting our "Clock
Water Softeners" page.
WS1S Water Softener - Autotrol 255/460i (3/4 inch)
WS1L Water Softener - Autotrol 255/742 (3/4 inch)
WS3S-HC Water Softener - Autotrol 268/440i (1 inch)
WS3L-HC Water Softener - Autotrol 268/742 (1 inch)
WS4S Water Softener - Fleck 5600 (3/4 inch)
WS6S Water Softener - Fleck 2510 (1 inch)
|
